[TYM 8900] TYM 8900 VSB Modulator

• Frequency setting VHF I - VHF III - S band - UHF (S02 - C69 Each channel can be in entire frequency band.)
• Output level of the desired channel can be weakened to -20dB with menu settings
• Audio/Video level can be adjusted to each channel
• Output frequency setting can be changed as a group
• Test Signal output for each channel
• Produced with HALF AGILE Technology.

TEKNOLINE TYM 8900 

In the case of giving a lot of broadcasts to distribution systems, side channel operation is inevitable because of the limitation in frequency spectrum . In such cases, it is needed to put very sharp filters (SAW) to improve selectibility and to be suitable for side channel operation. General use areas of Teknoline TYM 8900 TV Modulator are Cable TV (CATV) and Satellite Receiver Center, Antenna Systems (SMATV). Selectibility is increased with SAW filters in outputs.

In TEKNOLINE TYM 8900 TV Modulators, Audio/Video signals from receivers are modulated at intermediate frequency, passed through SAW filters, made VSB sharpening, converted into any channel (CCIR B+G) and side channel operation is made suitable for use. 

TEKNOLINE TYM 8900 TV Modulator can be adapted to TEKNOLINE TV-VSB system series easily with its balanced outputs and it can be merged with any amount of units. Devices are equipped with RF Attenuator which can have gain setting to -20dB in device menu. Also, video part has white level limiter and clamp structures.

General settings via 2X40 LCD display

It is possible to make a capacity between 4 and 52 as one unit bu using 8 channel combinations. in TEKNOLINE TYM 8900 Modulators.